Sewer cover is produced according to the following standards:
INSO 9119-1 and EN 1329-1
The Cap or Plug is a fitting used to seal the sewage system. This sealing can be temporary in some cases and permanent in others. Sometimes the outlet to be sealed is a male or female end, and the cap or plug can be used to close either of these configurations.
Features of the Cap/Plug
The most important difference between a cap/plug and a full pipe cap is their application. Full Protective Cap is used to seal the end of pipes or pressure vessels, is usually welded, and is permanent. However, the cap/plug is used to temporarily or permanently seal the outlet of pipes in sewage and plumbing systems and usually does not withstand high pressure.
The cap/plug is used to seal or block the end of pipes and outlets. The main purpose of this product is for protecting pipe openings during relocation and preventing damage. It is mostly used temporarily, although it can be applied permanently depending on the conditions.
The cap/plug is designed to be installed on both male and female outlets. Its installation is typically done by threading, press-fit, or welding.
The application of the cap/plug entirely depends on its material. If it is made of plastic (PVC), it is resistant to chemicals and moisture, but if you want to use this product under high pressure, it is better to use the metal type.
Sewage fittings 9119 by Oraman Gharb Company will reach dear consumers in white and packaged in a carton.
The technical specifications of the cap/plug are listed in the table below
| Color | Scope of application | Quantity in carton | Size |
| white | B-Elbow | 280 | 63 |
| white | BD-Plumbing Stack | 132 | 75 |
| white | BD-Plumbing Stack | 84 | 110 |
| white | BD-Plumbing Stack | 60 | 125 |
